1Ch AC DC Relay DC5301 AC2201 E

بورد تحكم عن بعد تردد 433

يستخدم في مجالات متنوعه ل تشغيل واطفاء عن بعد مثل

مصعد - مولد - انارة - بوابات - مضخات

تتوفر منه ثلاث أنوان

مباشر AC مخرج AC النوع الاول مدخل

Relay AC DC مخرج AC النوع الثاني مدخل

Relay AC DC مخرج AC النوع الاول مدخل

ملاحظة: الريلاي تتحمل 10 امبير

طريقة توصل النوع الاول

مواصفات

Working voltage : AC 85V~250V
Input/Output : 1V~250V
Max current : 10A
Max load: 2200W
RF frequency : 433Mhz
- Receiver size : 31*54*17mm
- Working temperature : -30~+80 Celsius
- Receiving Sensitivity : >97dbm
- Amount of storage remote controls : 25 pieces
- Support encoding : 1527 Learning code /2262 fixed code
- RF Operating mode : ASK superheterodyne wireless reception
- Receiving range : Open space is more than 50 meters
- Remote operating mode : Momentary Mode / Toggle Mode / Latched Mode

طريقة توصل النوع االثاني والثالث (مخرج ريلاي)

مدخل دي سي ومخرج أي سي *

مدخل دي سي ومخرج دي سي *

Working voltage : AC 12-24-220V As you Choose

Input/Output : 1V~250V Relay

Max current : 10A

Max load: 2200W

RF frequency : 433Mhz

Receiver size : 31*54*17mm
Working temperature : -30~+80 Celsius
Receiving Sensitivity : >97dbm
Amount of storage remote controls : 25 pieces
Support encoding : 1527 Learning code /2262 fixed code
RF Operating mode : ASK superheterodyne wireless reception
Receiving range : Open space is more than 50 meters
Remote operating mode : Momentary Mode / Toggle Mode / Latched Mode

طريقة البرمجه

Working Modes

You can set up in 3 modes: Momentary Mode,Toggle Mode and Latched mode.
Momentary mode:
Press and hold A button,this relay will work;Release A button,this relay will stop.
Toggle mode:
Press A button,the relay will work;press A button again,this relay will stop.
Latched mode:
Press A button,the relay will work;press B button again,this relay will stop,second relay will work.
How to Set up
Momentary mode:
Press learning button once,press A button once,succeed.
Toggle mode:
Press learning button twice,press A button once,succeed.
Latched mode:
Press learning button 3times,press A button once,succeed.
Clean data:
Press learning button 8times,the data will be cleaned.All remotes cannot control this receiver.
If u want to change modes,u need to clean the data first.

يمكن إختيار شكل الريموت ومجال اكبر من 50 متر