Parameters
RF frequency : 433.92MHz
Product Type: Copying/Duplicating Remote Control
Transmitter.
Match Code Way: Copying while attached to another remote
control (One to One Copying).
Channel Supported: 4 Channel.
Encoding Type: Learning Code (Example: 1527), Fixed Code
(Example: 2262).Rolling code (some brands and models)
Modulation System: ASK.
Operating Current:<25mA.
Transmission Power: +13dbm.
Support encoding : A lot of code
Transmitting range : Open space is more than 50 meters
Battery:CR2016*2(include)
Size:63*37*10mm
Programming
▶ Delete
Memory
Press and Hold "A" and "B" buttons at
the same time---Led will flash 3 times and turn off. And then release
"B" button and click "B" button 3 time---Led will flashing.
ssucceed.
▶Clone
your original remote
1. Put both remotes into "back to back" position.
Make sure they have direct contact. Or the two remote controls should be placed
as closely as possible( put the two remote controls on the desktop side by side
with zero distance)
2. Press and hold one button on your original remote , and
then press and hold one button on your clone remote. Keep holding until LED
will make 2 blinks( Note: LED 2 blinks not to release button) Then 3 blinks
then into steady and you have successfully cloned. ( each buttons follow the
same above operation)
Note:
If the copying is unsuccessful, delete the remote control
memory and copy again.
Before buying:
Dear customer, thank you for visiting our store.
If your remote control is a fixed code remote control or a
learning code remote control, please make sure your original remote control
meets the following conditions:
1 . The original remote control is good and can be used
normally.
2 . The frequency is 433.92 MHz.
3 . The chip code is one of the following codes:
●1527
(all models), 2260 (all models), 2262 (all models), 527 (all models), 2240 (all
models). For example: EV1527, SC2262, HS2262....
●SMC5326,
SMC918,SMC926, SM5028S,SC5262,SCL2240, PT2240, PT2264..
●HT12E,HT12D,HT600,HT680,HT6207,HT6010,HT6012,HT6014,HT6P20B,
HT6P20D, HT46F49E..
●LX2240,LX2241..
●AX5026,AX5326-3,AX5326-4..
●FP527, PIC16F630
!!NOTE:If your chip code cannot be found above or your
remote control is a rolling code remote control,
You need to make sure your remote is one of the following
brand models:
Comments
Post a Comment