3 key clone 433 KT51C E

on

 3 key Clone 433 KT51C

ريموت ناسخ للريموتات تردد 433
ثلاث كبسات
يستخدم في نسخ ريموتات البوابات والمصعد والانارة

Transmitter Parameter

--RF frequency : 433.92MHz

--Operating voltage : DC12V

--Product Type: Copying/Duplicating Remote Control Transmitter Key Fob.

--Match Code Way: Copying while attached to another remote control (One to One Copying).

--Channel Supported: 4 Channel.

--Encoding Type: Learning Code (Example: 1527), Fixed Code (Example: 2262),Rolling Code

--Modulation System: ASK.

--Operating Current:<25mA.

--Transmission Power: +13dbm.

--Support encoding : A lot of code

--Transmitting range : Open space is more than 50 meters

--Battery : CR2032( include 1 battery)

 

Please confirm three conditions befor purchasing.

1:The original remote control is good.

2:The frequency: 433.92Mhz

3:The chip Code(Encoder Chip) as listed below

2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (all manufacturers),

527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers)

HT6026, HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT6P20D, 12L-4SC

PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211

HCS101, HCS200, HCS201, HCS300, HCS301 (part of the code)

Note:

We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control.

 


Programming

Step1-Reset

Press and Hold "A" and "B" buttons together---Led will flash 3 times. And then release "B" button and click "B" button 3 time---Led will flashing. ssucceed.

 

Step 2-clone your original remote

1. Put both remotes into "back to back" position. Make sure they have direct contact. Or the two remote controls should be placed as closely as possible( put the two remote controls on the desktop side by side with zero distance)

2. Press and hold one button on your original remote , and then press and hold one button on your clone remote,Succeed,


السعر 7 دولار
متوف خدمة الديليفري




Comments

Post a Comment